Checkout our brand new Shrimp collection! On Sale Now!
To treat, dose one (1) teaspoon (~5 mL) of Ich-X® SW to 10 gallons (38L) of actual water in system. Care should be taken to avoid over-dosing and the addition of aeration during treatment is always helpful.
For Best Results: (1) always treat in a separate quarantine/treatment tank, (2) remove activated carbon from filters and clean or replace mechanical filtration media (do not stop filtration!) (3) make at least a 30% water change using your premixed saltwater before each addition of Ich-X SW® (use ClorAm-X® to condition the tap water when making your premix), and (4) repeat treatments at least every 24 hours, but no more than every 8 hours when accelerating treatment, depending on the course of the disease. Treatment should continue for a minimum of three (3) days beyond the visible signs of the disease. For use as a short term bath (dip) add two (2) teaspoons (~10 mL) per gallon of water and expose the diseased fish for approximately 30 minutes. (refer to the Ich-X® SW Product Data Sheet linked below for complete details on this process).
DO NOT OVERDOSE - this means you should calculate the actual amount of water in your tank by multiplying the length x width x height and dividing by 238 to get the true gallons. Please also deduct the amount of space consumed by substrate (gravel, sand, etc.) rock, decorations or other things which are displacing water.
WARNING: DO NOT ALLOW TO FREEZE – If you find crystalized material under the seal of the bottle when opening or noticeable clumps in the material when poured out, the product has been frozen and should not be used. When frozen the active ingredient can become lethal to fish.
NOTE: We do not recommend using any sulfur or sulfinite-based water conditioners with this product. If your normal water conditioner does not list the ingredients please verify with the maker that it does not contain these ingredients. If you notice any rotten egg smell to the product, it likely does have these ingredients and should be avoided as it could cause the product to be less effective and the dissolved oxygen levels to be negatively impacted.
A proprietary formula of water and formaldehyde (<3%)
You cart is currently empty